Skip to content

Metalwork, railings and ironwork

Metalwork and railings that meet safety requirements

Metalwork around a renovation includes railings for the balcony and stairs, gates, window bars and light steel structures for a pergola or an enclosure. Most problems are not born in the welding itself but in inaccurate measurement, anchoring to the wall or floor that does not suit the existing material, and a finish that was not properly prepared against rust. Before ordering, settle the type of metal, the design, the height and spacing, how it attaches to the building and the type of paint or galvanizing. A railing is a safety element, so every detail of it should be agreed and written down before fabrication.

Typical range

900-55,000 ₪

per meter or project

The range is a ballpark only. The final price is set after inspecting the property, the scope of work, the finishing materials and site conditions.

What's usually included?

  • Measuring and design
  • Metal fabrication
  • Painting or galvanizing
  • Installing railings and gates
  • Anchoring and safety

What affects the price?

  • Metal type and finish
  • Complexity and design
  • Scope and quantity
  • Safety requirements
  • Access and anchoring

How does RBM help keep it organized?

  • Measuring positions on site
  • Agreeing the spec and finish
  • Checking anchoring and safety
  • Installation sign-off

Stages of the work

  1. 01

    On-site measurement

    The metalworker comes to measure the space, checks the condition of the wall, the floor or the balcony edge and marks possible anchor points. At this stage you agree exactly where the element will run and which parts of the existing finish may be damaged during installation.

  2. 02

    Drawing and choosing the material

    Based on the measurement, a drawing is prepared with dimensions, design, profile thickness and the type of metal, steel or stainless steel. The homeowner approves the drawing in writing, including the height and spacing, and only then does fabrication begin.

  3. 03

    Fabrication in the workshop

    Cutting, welding and grinding are usually done in the workshop, and the parts are brought for installation when they are ready. Ask to see the product or photos of it before painting, while it is still easy to change a detail that does not fit.

  4. 04

    Preparation and finish

    Before painting, the metal is cleaned, rust and grease are removed and a primer is applied, and for some jobs the parts are sent for galvanizing. At this stage you approve the color, the gloss level and the number of coats agreed in the quote.

  5. 05

    Installation and anchoring

    During installation the element is drilled, anchored and leveled, and on a balcony or exterior wall every penetration is sealed so rainwater does not get in. The homeowner and the metalworker go over the anchor points together before they are covered.

  6. 06

    Inspection and handover

    At the end, stability, alignment, paint touch-ups where the installation caused damage and site cleanup are checked. Only after everything has been checked do you make the final payment, and you get maintenance instructions for the paint and the details of the color used from the metalworker.

What to check before you pay

  • Push and shake the railing at several points along its length, and check that it does not move and that the joints do not creak.
  • Make sure the actual height and spacing match what was approved in the drawing, and measure them yourself at several places along the railing.
  • Check that there are no sharp welds, grinding leftovers or open ends that could cause injury, especially at children's hand height.
  • Ask to see that the sealing around the anchor points on the balcony and the exterior wall is intact, with no cracks and no open holes.
  • Make sure the paint is even on the inner side and in the corners too, and that every scratch from the installation was touched up before the final payment.

Metalwork, railings and ironwork price list by line item

8 line items · updated 11/2026

  • Iron railing

    650-1,800 ₪

    per meter · By height, pattern, paint and installation.

  • Stainless steel railing

    900-2,500 ₪

    per meter · Pricier material and a precise finish push the range up.

  • Window bars

    800-2,500 ₪

    per unit · By size, pattern, opening and paint.

  • Metal entrance gate

    5,000-25,000 ₪

    per unit · Manual or electric, by size, motor and infrastructure.

  • Light steel structure

    650-1,600 ₪

    per m² · For a pergola, enclosure or reinforcement, per design.

  • Iron stairs

    12,000-55,000 ₪

    per project · Depends on frame, railing, cladding and design.

  • Metal painting

    80-220 ₪

    per meter · Prep, primer and finish coat, depending on current condition.

  • Repairing existing metalwork

    900-4,500 ₪

    per repair · Welding, reinforcing, replacing parts or on-site adjustments.

Updated November 2026 · price varies by spec and site conditions

See the full price list

Questions about Metalwork, railings and ironwork

Why must railings meet requirements?

A railing is there to stop a fall, so the height, the spacing between the profiles, the strength and the anchoring to the building are not a matter of taste. A railing that looks good but is anchored to a weak edge or has gaps that are too wide puts children at risk. If there is any doubt about the existing structure, consult an engineer before fabrication. A common example is a railing with horizontal bars that a child can climb like a ladder, so ask the metalworker in advance how the design you chose affects safety.

What affects the price of ironwork?

The type of metal is the first factor: stainless steel costs more than painted steel and requires a precise finish. Beyond that, the complexity of the design, the number of meters, the type of finish, access to the installation point and whether scaffolding or a crane is needed all affect the price. When comparing quotes, make sure they all include the same material, the same finish and the installation itself. A detail that is often forgotten is dismantling and removing the old railing, so ask for the quote to state explicitly who dismantles it, who removes it and who repairs the plaster or flooring damaged in the dismantling, and what happens with the old anchor holes.

Painted steel or stainless steel: which is a better fit?

Painted steel is more flexible in designs and colors, but needs repainting from time to time, especially near the sea. Stainless steel is more resistant to rust and does not need painting, but it also comes in different grades and different finish levels. Ask for the type of material to be written explicitly in the quote, not just the word metal. In a home near the sea, also ask about galvanizing under the paint and about the grade of stainless steel offered, because rust appears faster there even on metal that looks durable, mainly at the joints and welds.

What happens if during installation it turns out the wall or balcony edge will not hold?

This happens mainly in older buildings, when the concrete at the balcony edge is crumbling or the wall is hollow. In that case work stops before anchoring, the finding is documented and you decide together on another solution, for example anchoring to the floor or a wider plate. Agree any such change in writing, including its cost, before continuing. It is also worth asking in advance what the metalworker does if they come across exposed rebar at the balcony edge, because crumbling concrete sometimes hides damage that needs treatment before installation.

Do you need to clear the balcony or be at home during installation?

Clear the area of furniture, plants and fragile items, because installation involves drilling, cutting and sometimes welding on site, and sparks can damage the finish. It is good for someone from the household to be present at the start and end of the installation, to approve the position and go over the result. Also agree in advance who protects the nearby flooring and windows. If the railing is being built on a balcony in a shared building, let the neighbors below know, because dust and metal fragments may fall onto their balcony during drilling in the edge and welding.

How do you look after a metal railing or gate after installation?

Check from time to time for rust spots, mainly at the joints, at the bottom of the posts and in places where water collects. Deal with a small spot early by cleaning and painting it, before it spreads under the paint layer. Keep the details of the color and paint used, so a future repair will look even. After a rainy winter, also check that the sealing around the anchor points has not cracked, because water that gets in there rusts the steel from the inside and crumbles the concrete around it, and then the railing itself starts to move.

Related renovation work

Registered renovation contractors by city

Search for a contractor by name or contractor number

Looking for a contractor for metalwork, railings and ironwork?

Build a project file with a cost range, milestones and terms, and send it to contractors who work in an organized way.

Build a project file

We use cookies to improve your experience.