Skip to content

Doors and windows

Doors and windows start with measuring the opening

With doors and windows, most problems start before installation: measuring an opening that hasn't been plastered yet, a product ordered before the floor height was set, or a profile that doesn't fit the wall thickness. Even a quality product will work badly if the frame isn't level or the sealing around it is incomplete, and then water, wind and noise get in. It's important to understand who measures, who orders and who installs, and what is included in the finishing repairs around the opening. Settle the final floor height and the specification first, and only then take the final measurements.

Typical range

1,500-40,000 ₪

by item and size

The range is a ballpark only. The final price is set after inspecting the property, the scope of work, the finishing materials and site conditions.

What's usually included?

  • Measuring openings
  • Removing existing units
  • Installing doors and windows
  • Sealing and perimeter sealing
  • Finishing repairs around the opening

What affects the price?

  • Profile and glazing type
  • Number of openings
  • Condition of the existing opening
  • Insulation and acoustics
  • Access and floor

How does RBM help keep it organized?

  • Measuring existing openings
  • Coordinating the product specification
  • Checking installation and sealing
  • Approving the finish around the opening

Stages of the work

  1. 01

    Choosing the product and specification

    Choose the type of door, profile, glazing, shutter and screen for each opening, and write an organized specification that includes color, handles and opening direction. The homeowner approves the specification before measuring, because the order is placed according to it.

  2. 02

    Final measurement of the openings

    Each opening is measured after the plaster and the floor are at their final height, or according to a height agreed in writing. The supplier and the contractor approve the measurements together, and the homeowner receives a list of all the openings before the order is placed.

  3. 03

    Removal and preparing the opening

    The old door or window is removed, the opening is cleaned and broken or crooked edges are repaired. If moisture, rust on the subframe or an opening that isn't straight turns up, take photos and decide together on the repair before installation.

  4. 04

    Installation and leveling

    The door frame or window frame is installed level and plumb, anchored to the wall, and the sashes, handles and locks are fitted. Before sealing, the homeowner checks that the sash opens freely, closes all the way and doesn't rub.

  5. 05

    Perimeter sealing

    The gap between the frame and the wall is filled and sealed outside and inside, with special attention to the bottom of the window and its drainage. The contractor photographs the sealing before it is covered, and the homeowner confirms it is continuous on all sides.

  6. 06

    Finishing around the opening

    Plaster, paint and wall tiling around the opening are repaired, hardware, shutters and screens are installed, and everything is adjusted. At the end, go through every opening together, and the homeowner approves the handover once every sash and every shutter works properly.

What to check before you pay

  • Open and close every door and every window several times, and make sure they close easily and lock without force.
  • Check from outside and inside that the sealing around the frame is continuous and clean, with no holes, cracks or gaps open to the air.
  • Pour water on the window sill from outside, and make sure it comes out of the drainage holes and doesn't get into the home.
  • Compare the installed product with the specification you approved: type of glass, profile color, handles, opening direction and shutter.
  • Make sure the plaster, paint and wall tiling around the opening were repaired as agreed, and that there's no visible gap between the frame and the wall.

Doors and windows price list by line item

8 line items · updated 11/2026

  • Interior door, installed

    1,500-5,500 ₪

    per unit · Depends on door type, frame, handle and finish.

  • Front door

    4,500-20,000 ₪

    per unit · Security door or designer door, per spec.

  • Aluminum window

    800-2,400 ₪

    per m² · Includes profile, glass and standard installation.

  • Manual shutter

    1,000-2,600 ₪

    per unit · By dimensions, slat type and access.

  • Electric shutter

    1,600-5,000 ₪

    per unit · Includes a basic motor, excludes unusual electrical work.

  • Removing an existing window

    150-350 ₪

    per unit · For a standard window, before plaster and paint repairs.

  • Opening a doorway

    1,200-3,500 ₪

    per opening · In a block wall, excludes load-bearing walls.

  • Window screens

    250-800 ₪

    per unit · By dimensions and track type.

Updated November 2026 · price varies by spec and site conditions

See the full price list

Questions about Doors and windows

Does the price include the doors and windows themselves?

Not in every quote. Sometimes the contractor prices only removal and installation, and the product comes from a separate supplier who measures and orders it himself. In that case, it's important to agree on who is responsible for the measurements, who handles the sealing and finishing repairs, and what happens if a product arrives damaged or the wrong size. This division should appear in writing in each quote. For example, if the window arrives smaller than the opening, the supplier will say the measurements he received were wrong and the contractor will say the product doesn't match, and without a written agreement it's hard to know who is right.

Why does sealing matter when replacing windows?

Because most water and wind get in through the gap between the frame and the wall, not through the window itself. Incomplete sealing shows up in the first rain, when stains appear under the sill or cold air comes in near the frame. So the perimeter sealing should appear in the quote as a separate line and be photographed before it is covered. This is especially important for large windows or ones exposed to wind. A common example is a window installed with only silicone on the outside, without filling the gap, and once the silicone dries and cracks, water finds its way in, sometimes with nothing visible from outside.

When are the openings measured in a renovation?

Once the final floor height is known and the plaster around the opening is finished, or according to measurements agreed in writing with the contractor. Measuring too early can lead to a door that doesn't fit after the floor is tiled, or a window that leaves a large gap. If you have to order early, ask the supplier to come back and measure again before production. It's a good idea to be present at that measurement. Check this especially for the front door and the balcony door, because there the floor height inside and outside directly affects the threshold and the drainage.

Can windows be replaced without damaging the walls?

Sometimes yes, when the new frame fits the existing opening and the subframe is in good condition. When changing the profile type or enlarging an opening, part of the plaster usually has to be removed and restored afterward. Ask the contractor to spell out in advance what will be damaged around the opening and who restores the plaster, paint and wall tiling. For example, a kitchen window above a countertop or a bathroom window surrounded by tiles needs special coordination, because careless removal can break tiles that no longer have spares. Check in advance whether any tiles from the original wall tiling are left.

How do you compare quotes for doors and windows?

Compare opening by opening, not by total amount: profile type, glazing, shutter, screen, removal, sealing and finishing repairs. Quotes at a similar price may include different glass or leave the finishing to you. Ask for a list of openings with measurements and a specification, so you can put the quotes side by side. That way you also see right away if an opening was left out of one of the quotes. Pay attention to the glass: insulated glazing, tempered glass or safety glass change both the price and the insulation, and it's important that this is written for each opening.

How do you maintain windows and doors after installation?

Clean the tracks and the drainage holes in the windows, because dirt that builds up there makes water rise inside. Lubricate hinges and locks from time to time, and check that the rubber seals haven't cracked. Keep the specification and the supplier's details, so it's easy to order a replacement part or an identical sash. Cleaning the tracks is especially important before winter. A sign of a problem is a window that's hard to slide along its track or a door that starts scraping the floor, and then it's better to call the supplier for an adjustment before the rollers or hinges wear out.

Related renovation work

Registered renovation contractors by city

Search for a contractor by name or contractor number

Looking for a contractor for doors and windows?

Build a project file with a cost range, milestones and terms, and send it to contractors who work in an organized way.

Build a project file

We use cookies to improve your experience.